CASE

There are 30 products.


Showing 1-12 of 30 item(s)

Active filters

Fractal Design Pop XL Air, Full-Tower, ATX

Fractal Design Pop XL Air, Full-Tower, ATX

Price €113.00
  • Accommodates E-ATX Motherboards up to 280 mm
  • Comes with four 120 mm Aspect RGB fans and supports two more
  • Fits radiators up to 360 mm (front), 280 mm (top) and 140 mm (rear)
  • Two concealed 5.25" bays with storage drawer and magnetic cover
  • Front I/O with two 3.0 USB 5 Gb/s ports, Mic and headphone jacks
  • Optional USB-C kit (sold separately) adds full speed front port
  • Sports three storage trays, each supporting a 3.5" and a 2.5" at once
  • Unique, hexagonally patterned mesh for a striking visual effect
  • Online only
Musetex G06MN6-B, Mid-Tower, ATX

Musetex G06MN6-B, Mid-Tower, ATX

Price €137.00
  • Outstanding Airflow 6 pcs 120mm ARGB fans are pre-installed in MUSETEX PC gaming cases to provide lighting and excellent airflow at the same time, keep cooling with the case. Motherboard Compatability: ATX / Micro-ATX / Mini-ITX.
  • Multiple ARGB ModesRemote Control: G05MN6 Case is equipped with a unique music panel, its lighting can be changed with the rhythm of the music, can quickly adjust the ARGB lighting, speed, and mode; Button control has 19 lighting modes; Motherboard control: it connected to the 5V 3PIN header on the motherboard, the motherboard control can be unlimited ARGB fans modes (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only)
Corsair 4000D Airflow, Mid-Tower, ATX

Corsair 4000D Airflow, Mid-Tower, ATX

Price €99.00

Build your next PC and keep your components cool with the 4000D Airflow Mid-Tower ATX Desktop Case in black from CORSAIR. Install two 2.5" solid-state drives behind the motherboard tray and two 3.5" hard-disk drives underneath the PSU shroud. The 4000D Airflow comes with two 120mm fans preinstalled, with room for a total of six fans. Liquid cooling is also supported, with radiators up to 360, 280, and 240mm supported in the front and top of the case.

The 4000D Airflow supports ATX, micro-ATX, Mini-ITX, and E-ATX motherboards. Expansion cards can be installed using two vertical and seven horizontal expansion slots. GPUs measuring up to 14.2" in length, CPU coolers measuring up to 6.7" in height, and PSU's measuring up to 8.7" in length are supported.

NZXT H510 Flow, Mid-Tower, ATX

NZXT H510 Flow, Mid-Tower, ATX

Price €85.00

This compact mid-tower is an ideal case for high-performance builds and features a perforated front panel for maximized airflow. The H510 is easy to build in and offers flexibility for a variety of ATX parts.

  • - An optimized perforated top panel delivers increased airflow to your system for improved temperatures
  • - Iconic cable management bar and uninterrupted tinted tempered-glass side panel
  • - Cable routing kit with pre-installed channels and straps
  • - Two Aer F120mm fans and removable filters on all air intakes
  • - Removable bracket designed for radiators up to 280mm
NZXT H510, Mid-Tower, ATX

NZXT H510, Mid-Tower, ATX

Price €85.00

The NZXT H510 Mid-Tower Case features a sleek and minimalistic design with plenty of helpful additions for a clean and easy build. Aside from its signature cable management bar, it also has a PSU shroud and a built-in cable management system at the back. Whether you choose to liquid cool or not, the H510 supports up to two 120/140 mm fans at the front, a 120/140 mm fan at the rear, and another 120/140 mm fan at the top. Thanks to its tempered-glass side panel, you can show off your hardware along with any custom LED lighting.

  • Front USB 3.1 Gen 2 Type-C port with speeds of up to 10 Gb/s
  • Cable management bar and cable routing channels
  • Additional 2.5" drive mounting on top of the PSU shroud and behind the motherboard tray
  • 2 x 120 mm Aer F120 rifle-bearing fans included
Corsair iCUE 4000X RGB, Mid-Tower, ATX

Corsair iCUE 4000X RGB, Mid-Tower, ATX

Price €122.00

Build your next custom-built PC with style in the iCUE 4000X RGB Mid-Tower ATX Desktop Case in black from CORSAIR. Supporting ATX, micro-ATX, mini-ITX, and E-ATX motherboards, this case supports up to four drives with two 2.5" drive bays and two 3.5" drive bays. Seven horizontal expansion slots are present, in addition to two vertical expansion slots which allow you to show off your GPU with a vertical mount.

Keep components cool thanks to the three preinstalled 120mm RGB fans with support for a total of six fans. If you prefer to use a liquid cooling setup, there is support for a 360mm or 280mm radiator in the front of the case, a 280mm in the top of the case, and a 120mm radiator in the rear of the case. 

Lian Li O11 Dynamic EVO, Mid-Tower, ATX

Lian Li O11 Dynamic EVO, Mid-Tower, ATX

Price €168.00

Make your custom-built PC the centerpiece of your gaming space with the white Lian Li O11 Dynamic EVO Mid-Tower Case. Combining performance and aesthetics into a convenient package, the O11 Dynamic EVO gives experienced builders complete control over their build with ample room for gaming-focused components and optional accessories for even deeper customization.

Keep your desktop setup in mind with the reversible chassis, allowing you to configure your system so you can clearly see your components no matter where you place it. Additionally, the O11 Dynamic EVO supports fan, radiator, and custom loop cooling configurations, giving you optimal choice when it comes to managing your system's thermal performance.

Corsair 5000D Airflow, Mid-Tower, ATX

Corsair 5000D Airflow, Mid-Tower, ATX

Price €146.00

Keep your components cool and running at peak performance under heavy loads with the 5000D AIRFLOW Mid-Tower Desktop Case in black from CORSAIR. Supporting E-ATX, ATX, Micro-ATX, and mini-ITX motherboards, this case supports up to six storage drives with two 3.5" drive bays and four 2.5" bays. Graphics cards up to 15.7" in length are supported, while CPU coolers measuring up to 6.7" in height are supported.

The mesh front and top panels help channel airflow directly to your PC components. If you prefer liquid cooling setups, there is enough space inside the case to install a 360mm radiator in the front of case, a 360mm radiator in the top of the case, and space for another 120mm radiator in the rear of the case.

Phanteks Eclipse G360A, Mid-Towe, ATX

Phanteks Eclipse G360A, Mid-Towe, ATX

Price €94.00
  • High performance front panel with Ultra-fine Performance Mesh that combines high airflow performance and excellent dust filtrations.
  • Integrated D-RGB lighting that is easy to control and can be expanded and/or synced to a D-RGB equipped motherboard.
  • Three 120mm D-RGB fans and an integrated D-RGB LED strip is included. Storage support with 3x dedicated SSD locations (2 included) and 2x toolless HDD brackets.
  • Ready for high-end gaming systems with 360 radiator cooling support in front or top, full-length GPUs and vertical GPU ready with the optional Vertical GPU Bracket.
  • Easily accessible front I/O featuring 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB Color and Mode buttons.
Corsair 7000D Airflow, Full-Tower, ATX

Corsair 7000D Airflow, Full-Tower, ATX

Price €216.00

Maximize your custom PC build with the black 7000D AIRFLOW Full Tower Case from CORSAIR. Supporting E-ATX, ATX, micro-ATX, and mini-ITX motherboards, this full tower case features eight full-size expansion slots in addition to three full-size vertical expansion slots. The 7000D AIRFLOW comes with six 3.5" drive bays, four 2.5" drive bays, as well as three 2.5" drive mounts behind the motherboard tray. The 7000D AIRFLOW has space for up to twelve fans. Keep your components cool with a liquid cooling setup thanks to the support for a 480mm radiator in the front of the case, a 420mm radiator in the top, a 140mm radiator in the rear of the case, and a 480mm radiator on the motherboard tray.

Hyte Y60, Mid-Tower, ATX

Hyte Y60, Mid-Tower, ATX

Price €188.00

Turn your PC into the centerpiece of your game room with the HYTE Y60 Mid-Tower Case. Designed to show off your components with a wrap-around tempered glass panel, you can admire your hard work from the comfort of your gaming chair. Full 360° access and flexible design enables builders to install a wide range of components with ease.

NZXT H7 Flow, Mid-Tower, ATX

NZXT H7 Flow, Mid-Tower, ATX

Price €122.00

Get your next build off on the right foot while embracing proper airflow with the black NZXT H7 Flow Mid-Tower Case. Designed for new and seasoned builders, the H7 Flow streamlines component installation, giving you ample room for a wide range of gaming-focused components while giving you ample room to expand your cooling capabilities.

Each of the steel and tempered glass panels can be removed for complete 360° access. You get enough room to install Mini-ITX, Micro-ATX, ATX, and E-ATX (up to 272mm) motherboards comfortably with 7.3" of clearance for CPU coolers. Seven full-sized expansion slots are available for powerful graphics cards measuring up to 15.7" long while still promoting airflow around the rest of your components.